Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Dynamic Microphone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Headset type
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.125 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Bracket
MRC:
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.ADTV
Case Material:
Plastic
MRC:
The identifying numeric code of the originator that controls or manufactures the electrical connector receptacle.AEEE
Connector Manufacturer Code:
81350
MRC:
The additional parts supplied with the item which may be required for application.AFHR
Accessory Components:
Cord and connector
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+300.0/+3500.0
MRC:
The means used to select the output impedance of the item.AFYX
Impedance Selection Method:
Pin-jack type lead positioning
MRC:
The total opposition /resistive and reactive/ to the flow of alternating current.AFYY
Impedance Rating:
150.0 ohms
MRC:
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.AFZB
Output Sensitivity Rating Reference:
28 dynes per sq centimeter
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2320-01-123-1602
MRC:
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.AGAX
Polarity Connection:
Not required
MRC:
Indicates the specific type of sound pickup which determines the performance of the item.AGAY
Sound Pickup Directional Type:
Unidirectional
MRC:
An indication of whether or not a feature is included to enable the item to cancel undesirable background sounds.AGAZ
Noise Canceling Feature:
Included
MRC:
An indication of whether or not a support stand is included with the item.AGBA
Support Stand:
Not included
MRC:
An indication of whether or not the item is provided with a self-contained shock mount.AGBC
Shock Mount:
Not provided
MRC:
Indicates the type of electrical connection included on the item.AGBD
Electrical Connection Type:
Integral cord
MRC:
The specification,standard,or manufacturer's number or symbol used to identify the connector.AGBG
Connector Identification:
Jj-055
MRC:
The specification,standard,or manufacturers identification number or symbol used to identify the cable.AGBH
Cable Identification:
M22442/38-1
MRC:
A measurement of the longest dimension of a cable or cord when fully extended.AGBJ
Extended Cable Length:
1.0 feet
MRC:
The number of conductors,shielded and unshielded,which make up the cable.AGBL
Cable Conductor Quantity:
2
MRC:
The number of insulated conductors within the cable that are inclosed in an electrical shield.AGBM
Cable Shielded Conductor Quantity:
2
MRC:
The identifying alpha/numeric code of the originator that controls design or manufacturers the cable.AGBN
Cable Manufacturer Code:
81349
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
150 ohm microphone with boom and cord assembly for use on headset-microphones and helmets.
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.706 inches
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-m-26542 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
