Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Min grind areas on ends 250.0 deg; thickness at ground ends must not be less than 25 percent of wire dia
NSN
National Stock Number:
TXT
Description:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.188 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.333 inches
Spring Free Length:
0.956 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
10 4/5
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 32.000 pounds and 36.000 pounds
Spring Solid Length:
0.730 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
200.000 pounds per inch
Spring Free Outside Diameter:
0.322 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
0.786 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k15590
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-412, comp 2 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Must work freely in 0.333 in. Diameter hole at 0.780 lg
