Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Automotive Axle Shaft
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.514 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
33.810 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
60.0 rockwell c
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
6.560 inches
MRC:
The length of a striaght line which passes through the center of the first end bearing seat,and terminates at the circumference.AMEL
First End Bearing Seat Diameter:
1.618 inches
MRC:
The measured distance of the first end from the bearing seat to the end.AMEP
First End Distance From Bearing Seat To End:
1.770 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
1.715 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
1.250 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Flanged
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
5 unthreaded hole
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
30
MRC:
The length of a straight line which passes through the center of the facility on the second end,and terminates at the circumference.BNPK
Second End Facility Diameter:
Between 0.745 inches and 0.754 inches
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Included
MRC:
A measurement taken at right angles to the length of a bearing seat on the first end,in distinction from thickness.BNTG
First End Bearing Seat Width:
1.850 inches
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Involute
MRC:
The pressure angle of the second end spline,expressed in degrees.BNTN
Second End Spline Pressure Angle In Deg:
45.0
MRC:
The facility furnished on the second end for engaging,locking,and/or positioning the item.BNTQ
Second End Engaging/locking/positioning Facility:
Locking device groove
MRC:
A measurement taken at right angles to the length of the facility on the second end,in distinction from thickness.BNTR
Second End Facility Width:
Between 0.156 inches and 0.166 inches
MRC:
Indicates the location of the facility on the second end of the item.BNTS
Second End Facility Location:
0.308 in. Min 0.312 in. Maximum from shaft end
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
An overall measurement of the smallest dimension of the flange,in distinction from length or width.BNYS
Flangethickness:
0.390 inches
MRC:
A measurement of the smallest dimension of the flange at the mounting hole,in distinction from length or width.BNYT
Flange Thickness At Mounting Hole:
0.390 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, sae 1050
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, sae 1050
