Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Flange To Boss Elbow
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Gasket seal (boss) 2nd end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
1.440 inches 2nd end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
2.120 inches 1st end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.380 inches 1st end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.880 inches 1st end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Rectangular with holes 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal boss 2nd end
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 2nd end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.312 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.438 inches 1st end
MRC:
The center to center nominal distance between bolt holes along the length of an item.CWCY
Center To Center Distance Between Bolt Holes Along Length:
2.062 inches 1st end
MRC:
The center to center nominal distance between bolt holes along the width of an item.CWDC
Center To Center Distance Between Bolt Holes Along Width:
1.062 inches 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Recessed with gasket groove 1st end
MRC:
The nominal length of a straight line which passes through the center of the recess,and terminates at the circumference.CWDP
Recess Diameter:
0.875 inches 1st end
MRC:
A nominal measurement between specified points on the recess,in distinction from height.CWDS
Recess Depth:
0.121 inches 1st end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cond-a federal specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unj 2nd end
