Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
One central tang 0.602 in.Nom lg by 0.250 in.W extending one side w/0.310 in.Corner radius; holes countersunk 82 degrees to 0.390 in.Min, 0.400 in.Max dia; shape: special
NSN
National Stock Number:
TXT
Description:
Bearing Retaining Plate
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.228 inches and 1.248 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 1.503 inches and 1.520 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.203 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Horizontal centerline
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.318 inches
Distance Between Holes Along Length:
Between 0.874 inches and 0.877 inches
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
2
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.185 inches and 0.186 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 39.0 rockwell c and 43.0 rockwell c
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e4340
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mili6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
