Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pump-electric motor driven alchol and water
NSN
National Stock Number:
TXT
Description:
Rotary Pump Unit
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Unthreaded hole
MRC:
The number of intake connections included on the item.AAYT
Intake Connection Quantity:
1
MRC:
The number of discharge connections included on the item.AAYV
Discharge Connection Quantity:
1
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Alcohol and water, fresh
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Explosion proof
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
P3c orion fuselage
MRC:
The maximum rated capacity delivered by the item.AHYV
Maximum Discharge Flow Rate:
0.0833 gallons per minute
MRC:
The pressure of the media delivered by the item at maximum rated discharge capacity.AHYW
Discharge Pressure:
30.0 pounds per square inch gage
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
4.5
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the intake connection.ASWT
Intake Connection Thread Size And Series/type Designator:
0.750-16 unf
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
115.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Operating pressure 28 psi min; proof pressure 45 psi; rated flow 5 gph at 30 porm 2 psi at 70 degrees f to 90 degrees f, 16.9 inch hg, absolute ambient pressure; reflief valve removed; electrical duty intermittent; voltage 380/420 cps; operting current 1.4 amps max, locked rotor current 4.5 amps max; explosion proof as required by 421672; thermal protection as required by 421672; power factor removed; outlet fluid port 9/16-18 nf-3 thread per and10050 or ms33649; seal drain 7/16-20 nf-3 thread per and10050 or ms33649; electrical connector bendix scintilla pto2e-8-2p in accordance with mil-c-2648 (asg) ; fluid mixture 80 pct isopropyl alcohol and 20 pct tap water; temperature m65.0 to 165.0 degrees f
