Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Automotive Axle Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.781 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
42.0 rockwell c
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
1.619 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
1.265 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
1.495 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
1.750 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
1.136 inches
MRC:
The length of a straight line which passes through the center of the second end bearing seat,and terminates at the circumference.AMHL
Second End Bearing Seat Diameter:
1.312 inches
MRC:
The measured distance of the second end from the bearing seat to the end.AMHM
Second End Distance From Bearing Seat To End:
2.750 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Splined
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of first end spline(s) provided.BBCD
First End Spline Quantity:
6
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
19
MRC:
The length of a straight line which passes through the center of the facility on the first end,and terminates at the circumference.BNPJ
First End Facility Diameter:
Between 1.031 inches and 1.625 inches
MRC:
The facility furnished on the first end for engaging,locking,and/or positioning the item.BNTB
First End Engaging/locking/positioning Facility:
Locking device groove and shoulder
MRC:
A measurement taken at right angles to the length of the facility on the first end,in distinction from thickness.BNTC
First End Facility Width:
Between 0.125 inches and 0.312 inches
MRC:
Indicates the location of the facility on the first end of the item.BNTD
First End Facility Location:
1.250 in. Between groove and shoulder, 0.312 in. From end of shaft
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Involute
MRC:
The pressure angle of the second end spline,expressed in degrees.BNTN
Second End Spline Pressure Angle In Deg:
30.0
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Included
MRC:
A measurement taken at right angles to the length of a bearing seat on the second end,in distinction from thickness.BNTW
Second End Bearing Seat Width:
1.156 inches
MRC:
Indicates the type of first end spline provided.BNYX
First End Spline Type:
Straight
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, aisi 4130 or steel, qq-s-624
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, aisi 4130 or steel, qq-s-624
