Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Weapon system essential. Features: supports clark model 290m; tractor, wheeled, ind., diesel driven; med dbp, nsn: 2420-00-088-9384, w/rops. Nsn: 2420-01-059-0090.
NSN
National Stock Number:
TXT
Description:
Pipe Flange
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
2.844 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
0.355 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.625 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.844 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
3.062 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.468 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.953 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
A measurement of the longest dimension of a flange,in distinction from width.AFQN
Flange Length:
3.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Field artillery ammunition support vehicle (faagv) (m992). Forrestal class cv, nimitz class cvn. M-109 series howitzer. (rt41aa) crane. M-88 series recovery vehicle.
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
1.859 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.531 inches
Neck Height:
0.422 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Recessed face, raised neck
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Machined
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium or oxide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, with bolt holes
