Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Liquid Level Gage Rod-cap
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.656 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
16.781 inches
MRC:
Indicates the type of cap furnished with the item.AEUX
Cap Type:
Friction
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
0.219 inches
MRC:
An indication of whether or not the item is furnished with a handle.AFYG
Handle:
Furnished
MRC:
The distance of separation from the end of the rod to the start of the scale graduation.BJFJ
Distance From Rod End To Scale Graduation:
2.875 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the rod end and at the start of the cap.BJFR
Rod Length From End To Cap:
14.719 inches
MRC:
A measurement taken at right angles to the length of the rod measuring portion,in distinction from thickness.BJFW
Rod Measuring Portion Width:
0.188 inches
MRC:
A measurement of the smallest dimension of the rod measuring portion,in distinction from length or width.BJFX
Rod Measuring Portion Thickness:
0.125 inches
MRC:
The inscription affixed to or stamped on the scale,excluding part number.BKBF
Scale Inscription:
Low and full
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi or sae 1008 through aisi or sae 1020
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1008 or steel comp 1010 or steel comp 1011 or steel comp 1012 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard single material response or aisi 1008 through 1020 assn standard single material response or sae 1008 through 1020 assn standard single material response
