Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Materials: phosphor bronze iaw qq-b-750 for contact insulator is glass filled thermoplastic iaw astm d4066 or thermoplastic iaw mil-c-24519 temperature range is - 40 degrees cent. To 105 degrees cent, current rating : 3 amps continous to 5 amos dielectric w/standing volt. Is 1000 v. Rm (sea level) insulation resistance is 5, 000 megohms
NSN
National Stock Number:
TXT
Description:
Electrical Contact Assembly
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
6
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Post
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.450 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.095 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.025 inches
MRC:
The number of contacts which provide electrical connection.AFRA
Contact Quantity:
6
MRC:
Indicates the designed use of the item.ALCD
Usage Design:
Printed circuit board
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
040 in. Mtg. Holes on .100 in. Centers
MRC:
The basic structure of the item.ALXF
Structural Design:
Nonswitching
MRC:
The name of the contact/s/ assigned by the controlling government agency.APDJ
Contact Item Name Assigned By Government Agency:
Connectors, electrical, unshrouded headers, pwb termination .025, single row, straight through
MRC:
The name of the government agency controlling the contact/s/.APDK
Government Agency Controlling Contact:
Desc
MRC:
An identifying number assigned by the government agency controlling the contact/s/.APDL
Contact Identifying Number Assigned By Government Agency:
86101-08-e-01
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
14933-86101 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
14933-86101 rev c/desc-eq government specification
