Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two slots 0.062 in. By 0.145 in. By 1.010 in. Equally spaced vertical to thd
NSN
National Stock Number:
TXT
Description:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.826 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
3.920 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.400 inches and 0.420 inches
Width Between Flats:
Between 1.052 inches and 1.072 inches
First Diameter From Head:
Between 0.751 inches and 0.752 inches
Second Diameter From Head:
0.690 inches
Third Diameter From Head:
Between 0.751 inches and 0.752 inches
Fourth Diameter From Head:
0.690 inches
Fifth Diameter From Head:
Between 0.751 inches and 0.752 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.590 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
1.260 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
1.760 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
2.440 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
2.940 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
32.0 rockwell c and 36.0 rockwell c
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams 2481 assn standard single treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
