Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
There are 12 sloted holes (legend a) along the length rotated 90 deg, tere is also 7 holes diameter 0.250 to 0.255 in. W/blk screening on opposite side that are concentric with holes porm 0.060 in.; there are 6 holes diameter 0.219 porm 0.001 in.(legend c) located along length; paint is p513.1e gray, overspray permissible; after screening, coat with 2 coats of polyurethane; item consists of 1 gasket cover p/n 687-7224-001, 6 0.164-32 clinch nuts p/n m45938/5-7, 7 turnlock stud fasteners p/n 012-1355-000, 7 retaining rings p/n 340-1884-020, 7 sealing washers p/n 310-0147-010
NSN
National Stock Number:
TXT
Description:
Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.208 inches and 0.248 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 4.855 inches and 4.895 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, rounded corners, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
13.560 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.250 inches
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
1.175 inches and 0.850 inches and 1.700 inches
Distance Between Holes Along Width:
1.470 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Turnlock fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Closed vertical slot
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Gps user equipment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8 h32 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-f-14072, type 1 or 2 military specification single treatment response
