Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Automotive Axle Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
40.750 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
50.0 rockwell c and 53.0 rockwell c
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
Between 7.865 inches and 7.869 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
Between 8.087 inches and 8.093 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
8.012 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
3.000 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
Between 2.305 inches and 2.321 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
2.628 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
2.493 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Splined
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of first end spline(s) provided.BBCD
First End Spline Quantity:
66
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
17
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Involute
MRC:
The pressure angle of the second end spline,expressed in degrees.BNTN
Second End Spline Pressure Angle In Deg:
40.0
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
Indicates the type of first end spline provided.BNYX
First End Spline Type:
Involute
MRC:
The pressure angle of the first end spline,expressed in degrees.BNYY
First End Spline Pressure Angle In Deg:
14.3
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel mil-s-13048 fs 4150 h or fs 8650 h
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel mil-s-13048 fs 4150 h or fs 8650 h
