Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Ftg, plug 60rg ms inhex
NSN
National Stock Number:
TXT
Description:
Machine Thread Plug
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand external
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
10.160 millimeters external
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
17.53 millimeters
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
2.29 millimeters
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.45 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4210-01-622-0440; truck, fire fighting
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Gasket seal
MRC:
Indicates the type of head provided.AJGD
Head Type:
Solid
MRC:
Indicates the type of body provided.AJGE
Body Type:
Solid
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
O ring
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
18 external
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.560 inches external
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Drive type: internal hex, hex width between flats: 6.35 millimeters ; finish: shall meet a corrosion requirement of 450 hours to red rust and 200 hours to white rust per astm b117; o-ring material: must withstand temperatures from -40 degrees celsius to + 135 degree celsius, recommended material: flourocarbon (v1289-75)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plug, machine
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf external
