Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Valve, 4 way closed center
NSN
National Stock Number:
TXT
Description:
Directional Control Linear Valve
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
4
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
7.0 gallons per minute
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-458-7550
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external boss
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
18
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
3000.0 pounds per square inch oil and 3000.0 pounds per square inch hydraulic fluid, petroleum base
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.312 inches
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
225.0 degrees fahrenheit oil and 225.0 degrees fahrenheit hydraulic fluid, petroleum base
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Has 3 detent held positions; hydraulic fluid per mil-prf-5606h; uses sae 10 lube oil; flush with oil per mil-prf-6083; mark with metal stamp which is to be engraved or by use of electric arc pencil with letter height 0.25/0.12
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
