Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Sixth diameter from head 0.4720 in. Min diameter to 0.4724 in. Maximum diameter and located 2.170 in. From the bearing surface
NSN
National Stock Number:
TXT
Description:
Externally Relieved Body Bolt
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.410 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.690 inches and 2.700 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.705 inches and 0.709 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.200 inches
Distance From Centerline To Flat:
Between 0.293 inches and 0.298 inches
First Diameter From Head:
Between 0.402 inches and 0.406 inches
Second Diameter From Head:
0.472 inches
Third Diameter From Head:
Between 0.402 inches and 0.406 inches
Fourth Diameter From Head:
0.472 inches
Fifth Diameter From Head:
Between 0.402 inches and 0.406 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.160 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
0.430 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
1.110 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
1.190 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
1.790 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.469 inches
MRC:
The minimum and maximum pitch diameter limits of a nonstandard straight screw thread.CFSG
Nonstandard Thread Pitch Diameter:
+0.4370/+0.4385 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
248.0 brinell standard and 341.0 brinell standard
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron alloy 660
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5735 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Uns
