Part Number 70700-77325-044

Nonmetallic Hose Assembly

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
70700-77325-044
Demil:
No
Shelf Life:
UOM:
NIIN:
014643916

Part Information
Hose not recommended for any fuel, nor cooling lines for air conditioner and heat pumps, or for hydraulic applications with extreme pulsations; hose recommended for vacuum applications; reusable compression hose clamp fittings are clamped to each end of hose using compression side of fitting; other side of hose clamp fittings have 0.250 in. Male pipe thread which is inserted into the threaded end of quick disconnect fittings; quick disconnect fitting material is stainless steel 303, socket valve o-ring is buna-n, and socket backup o-ring is polytetrafluoroethylene; length of quick disconnect fitting is 2.260 in. Nom, internal threaded end of fitting is 0.880 in. Nom. Across flats, and sleeve is 1.170 in. Nom. Outside dia; identification band is corrosionresistant steel, maximum width of 0.750 in, and is firmly attached to hose as close to either end as possible

NSN
National Stock Number:
4720-01-464-3916 4720014643916
TXT
Description:
Nonmetallic Hose Assembly
INC
INC
Item Name Code:
20311
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.500 inches
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
2.500 inches
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Black
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4310-01-434-4532, vacuum pump unit, reciprocating
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Push (internal) 1st end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Straight 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Internal quick disconnect 1st end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Reusable end fittings and self-sealing
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
1400.0 pounds per square inch
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
1st layer molded rubber, synthetic and 2nd layer braided textile yarn and outer layer molded rubber, synthetic
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
44.000 inches excluding end fittings
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air and hydraulic fluid and hydraulic fluid, water base and water single response

Similar Nonmetallic Hose Assemblies

« Hose and Flexible Tubing Catalog
Compare Now »
Clear | Hide