Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Nonresettable
NSN
National Stock Number:
TXT
Description:
Rotating Counter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.272 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.469 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Between 0.155 inches and 0.156 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
0.500 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
3.018 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
1.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Poseidon
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
2
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
2 1st register single tier
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
2 2nd register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.250 inches 1st register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.250 inches 2nd register single tier
MRC:
The number of shaft revolutions required to make one count.ANRD
Shaft Revolutions Per Count:
0.10 1st register single tier
MRC:
The number of shaft revolutions required to make one count.ANRD
Shaft Revolutions Per Count:
0.10 2nd register single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
12000.0 per minute 1st register single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
12000.0 per minute 2nd register single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting.ANRL
Mounting Arrangement Style:
Four position square/rectangle
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add 1st register single tier and subtract 1st register single tier
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add 2nd register single tier and subtract 2nd register single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Right side 1st register single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Right side 2nd register single tier
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Base all registers single tier
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Drum
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
00 1st register single tier and 99 1st register single tier
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
00 2nd register single tier and 99 2nd register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
1200.0 clockwise 2nd register single tier and 1200.0 counterclockwise 2nd register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
1200.0 clockwise 1st register single tier and 1200.0 counterclockwise 1st register single tier
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black 1st register single tier figure background
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black 2nd register single tier figure background
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White 1st register single tier figure
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White 2nd register single tier figure
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Unenclosed square or rectangular
