Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Manufacturer suggested name t-seal assembly i.D. Seal, special
NSN
National Stock Number:
TXT
Description:
Packing Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square/rectangular bottom ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square/rectangular top ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Tee intermediate ring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 1.564 inches and 1.566 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
Between 1.978 inches and 1.988 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 275.0 degrees fahrenheit
MRC:
The number of rings between the top and bottom rings.ADTH
Intermediate Ring Quantity:
1
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-15i aircraft
MRC:
Indicates the type of joint/s/ on the item.AQNE
Joint Type:
Scarf-peripheral top ring
MRC:
Indicates the type of joint/s/ on the item.AQNE
Joint Type:
Scarf-peripheral bottom ring
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.321 inches and 0.331 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene bottom ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene top ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr intermediate ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Graphite filled polytetrafluoroethylene per gtc +4 mfr ref single material response top ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Graphite filled polytetrafluoroethylene per gtc +4 mfr ref single material response bottom ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-25732 military specification single material response intermediate ring
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
93835966526 manufacturers standard
