Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Chassis detail, test fixture - xmtr sra
NSN
National Stock Number:
TXT
Description:
Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.000 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.090 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.480 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
3.670 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
9.000 inches
Hole Quantity Along Length:
3
Hole Quantity Along Width:
7
Distance Between Holes Along Width:
Between 1.370 inches and 1.400 inches
Distance Between Hole Centerline And First Hole Along Length:
2.405 inches
Distance Between Hole Centerline And First Hole Along Width:
1.400 inches
Distance From First Hole Centerline To End Along Length:
3.905 inches
Distance From First Hole Centerline To End Along Width:
1.895 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.250 inches
First Recess Inside Height:
0.410 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.090 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.090 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Apg 65 otps
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Includes 16 mounting holes with 0.144 in. Dia.; includes 2 mounting holes with 0.166 in. Dia..
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint polyurethane
