Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Oval
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.422 inches and 2.453 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.620 inches and 0.622 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.175 inches
Undercut Diameter:
Between 0.526 inches and 0.531 inches
Undercut Width:
Between 0.045 inches and 0.050 inches
Second Undercut Width:
0.070 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.151 inches and 0.161 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.172 inches and 0.203 inches
First End Taper Length:
Between 0.078 inches and 0.109 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
89.0 rockwell superficial 15-n and 91.0 rockwell superficial 15-n
MRC:
Indicates the location of the first end.CRDY
First End Location:
Large end
First End Taper Angle:
Between 44.0 degrees and 46.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
Second End Outer Radius:
Between 0.047 inches and 0.078 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove