Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Min thickness one end maximum thk second end
NSN
National Stock Number:
TXT
Description:
Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.250 inches and 0.256 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.250 inches
Distance Between Holes Along Length:
1.250 inches
Distance Between Holes Along Width:
1.130 inches
Distance From First Hole Centerline To End Along Length:
0.440 inches
Distance From First Hole Centerline To End Along Width:
0.440 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.036 inches and 0.081 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Spcl
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t651 federal specification single material response
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Thickness tapered from 0.081 in. To 0.036 in.
