Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
90 degrees countersink to 0.125 in. Diameter on smaller diameter end
NSN
National Stock Number:
TXT
Description:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.499 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 0.400 inches and 0.412 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.1875 inches and 0.1880 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.855 inches and 0.895 inches
Undercut Diameter:
Between 0.175 inches and 0.185 inches
Undercut Width:
Between 0.030 inches and 0.035 inches
Second Undercut Diameter:
Between 0.237 inches and 0.247 inches
First End Taper Length:
0.032 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
Second Shank Diameter:
Between 0.2494 inches and 0.2498 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Large end
First End Taper Angle:
45.0 degrees
Second Shank Length:
Between 0.246 inches and 0.251 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut
