Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Sides along length periphery narrow to 5.125 in. Width, with 2.000 in. Outside radius and0.500 in. Inverted radius conecting the two levels and periphery change beginning 4.062 in. From end, center of recess is on length centerline and 3.062 in. From end of wide width area, two pair 0.128 @min @0.131 maximum in. Diameter holes located 1.562 in. On either side of length centerline, 1.625 in. C to c @distance between holes of each pair w/first holes 0.500 in. From end of narrowed width of cover, 0.438 in. Outside corner radius on narrow width end of cover
NSN
National Stock Number:
TXT
Description:
Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
2.875 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.344 inches and 0.359 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.125 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.105 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
7.000 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.375 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
3.937 inches
Distance Between Holes Along Width:
5.375 inches
Distance From First Hole Centerline To End Along Length:
0.375 inches
Distance From First Hole Centerline To End Along Width:
0.375 inches
First Recess Inside Height:
0.250 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.105 inches
Outside Corner Radius:
0.125 inches
Body Outside Radius:
0.125 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Brake case winch, vehicular
