Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Small diameter threaded 0.375-24 unjf 3a; head drilled in center to 1.340 in. Dp by 0.625 in. Dia
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
Distance From Centerline To Flat:
Between 0.685 inches and 0.695 inches
Under Head Length:
2.476 inches
First Step Diameter:
Between 0.9980 inches and 0.9985 inches
First Step Length:
Between 1.800 inches and 1.805 inches
Second Step Diameter:
Between 0.3678 inches and 0.3750 inches
Second Step Length:
0.676 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.106 inches and 0.116 inches
Distance From Centerline Of Hole To End Of Pin:
0.186 inches
First End Taper Length:
Between 0.046 inches and 0.076 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
1.375 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches large shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.150 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6411 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ps13102 class b, fscm 76301 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
