Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two tapped holes spaced 0.500 in. From ends of terminal 0.138-32nc, 0.156 in. Deep, a through hole 0.250 in. From end of mtg 0.125 dia; basic shape style single ended nontubular
NSN
National Stock Number:
TXT
Description:
Stud Terminal
MRC:
A measurement of the longest dimension of the terminal,in distinction from width.AAEY
Terminal Length:
0.312 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
1.500 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.AAJW
Overall Diameter:
0.312 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.AALA
Largest Diameter:
0.312 inches single end
Wire Hole Diameter:
0.257 inches single end
MRC:
The feature consisting of sleeves,covering,caps,mounting bushings and the like,used to electrically insulate an item.AALV
Electrical Insulation Feature:
Uninsulated
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Tapped hole
MRC:
The length of a straight line which passes through the center of the threaded mounting,and terminates at the circumference.AAMP
Mounting Thread Diameter:
0.138 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
0.250 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of a threaded mounting.ATGD
Mounting Thread Series:
Unc
MRC:
The number of mounting threads on the item measured on a line parallel to the thread axis,including incomplete threads.CGGK
Mounting Thread Quantity:
32 per inch
MRC:
Indicates the type of connector or conductor accommodation included on the item.CSFJ
Conductor Accommodation Type:
Solder pot single end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 360 except insulation
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, 1/2h federal specification single material response except insulation
