Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
(inavy) pin, alignment assembly
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
Under Head Length:
Between 13.641 inches and 13.671 inches
First Step Diameter:
2.313 inches
First Step Length:
9.656 inches
Second Step Diameter:
1.813 inches
Second Step Length:
Between 3.985 inches and 4.015 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/aqs-20a, maintenance stand
Pin Head Diameter:
Between 2.719 inches and 2.781 inches
First End Outer Radius:
Between 0.719 inches and 0.781 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Head is attached to pin with 5/16 18 x 3/4 inch cres through 0.323 inch hole and threaded into a threaded (0.313 18 unc) hole 0.75 in deep; a 0.563 inch through hole is located 1.875 inches from first end on pin; second through hole (0.390 in dia) is located 1.531 inches from second (below head) and a 3rd through hole (identical to 2nd hole) is located 5.0 in from 2nd hole towards first end of pin; allignment pin assembly includes alignment pin, head (stop), and flat head screw
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.235 inches and 0.285 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
