Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Item has a total of 9 holes equally spaced
NSN
National Stock Number:
TXT
Description:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
Between 0.077 inches and 0.081 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
0.312 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.254 inches and 0.256 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.882 inches
Undercut Diameter:
Between 0.247 inches and 0.249 inches
Undercut Width:
Between 0.069 inches and 0.073 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
Between 0.053 inches and 0.057 inches
Second Hole Diameter:
Between 0.053 inches and 0.057 inches
Distance From Centerline Of Hole To End Of Pin:
0.492 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.080 inches
Second End Counterbore Diameter:
0.106 inches
First End Taper Length:
0.031 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Chamfered end
First End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-19468, group a military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut
