Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bore lg of shaft 0.490 in. Nom dia
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Hexagonal
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Woodruff keyway and circular grooved
Second End Groove Width:
0.0580 inches
Second End Groove Diameter:
1.4050 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.280 inches
MRC:
The distance from one flat to the opposite flat of the first end.ACKY
First End Width Across Flats:
Between 1.720 inches and 1.730 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.9000 inches
Second End Distance From End To Groove:
0.192 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
0.2500 inches
Second End External Keyway Length:
1.000 inches
Second End Distance From Keyway Center To End:
1.240 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.4990 inches and 1.5000 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.900 inches
First End Step Length:
2.540 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, class 303, cond a federal specification single material response or qq-s-764, class 304, cond a federal specification single material response or qq-s-766, class 303, cond a federal specification single material response or qq-s-766, class 304, cond a federal specification single material response
