Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
3/4" bronze union end swing check
NSN
National Stock Number:
TXT
Description:
Check Valve
MRC:
A measurement of the pipe size the item will accommodate.AAAR
Pipe Size Accommodated:
0.750 inches all ends
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Disk
MRC:
The means of closing the item when inlet pressure decreases.ADSU
Disk Loading Method:
Weight
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
150.0 degrees fahrenheit single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Socket (pipe) all ends
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Unthreaded internal pipe all ends
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Horizontal
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
400.0 pounds per square inch single response
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Cds cds 5399-033-e-0001 rev b dated 1-14-09 delineates modifications to navships dwg 803-1385721: 1) orings of fluorocarbon iaw mil-r-83248, type 1 cl 1; 2) socket bore breakage/chamfer shall not exceed .010; 3) waterway bore breakage/chamfer shall not exceed .0625; 4) tailpieces are cuni iaw mil-c-15728 alloy c71500, union end connections iaw mil-f-1183; 5) nicu side plugs. Design pressure 400.0 psi, temperature 150 degrees fahrenheit.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 922 body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy flow control device
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b494 gr -30c assn standard single material response flow control device
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b61 assn standard single material response body
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water-oil-gas single response
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
This equipment considered shock qualified by test active report no aeronav lab inc shock test no. 0-1102-2; naval approval authority subships nn, va letter 9505 ser cvn74/75-262g/1063 dated 28 may 1991.Considered vibration qua ified by test report 9-1045-1 by aeronav labsdates 15 jun 1990. Approved by: supships nn, va ltr 9505 ser cvn76-261g/1161 dated 24 jun 1996.
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight thru
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.TMQY
Furnished Items And Quantity:
2 tailpiece
