Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Ball bearing retaining nut
NSN
National Stock Number:
TXT
Description:
Hexago Extended Washer Plain Nut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
Washer Outside Diameter:
Between 4.662 inches and 4.672 inches
MRC:
A substance designed to provide a reduction of friction between the two surfaces in contact.ABAJ
Lubrication:
Oil
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Hexagon
Washer Thickness:
0.843 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Size 8 valve, v-30 actuator standard navy gate vlv and actuator
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
4.03125 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Uns
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
11.5
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
3.128 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Lubricated with a-a-59004 anti-galling compound applied uniformly; threads are drilled and tapped with two holes 180deg apart for assembly purposes; bottom surface machined to 125 microinches; sides machined to 250 microinches
MRC:
The substances and/or materials contained in the item that have been identified as hazardous or environmentally damaging by the environmental protection agency or other authorized government agency.HZRD
Hazardous Substances:
Lead
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 861 or copper alloy 862 or copper alloy 863
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b584 cl a alloy no.C86400 or c86500 assn standard single material response
