Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Hand Crank
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.750 inches
MRC:
A measurement of the longest dimension of the handle,in distinction from width.AASN
Handle Length:
4.000 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.500 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.375 inches
Slot Length:
1.250 inches
MRC:
An outside measurement taken at right angles to the length of an item,in distinction from thickness.ADJV
Outside Width:
1.750 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
1.718 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive end.AJFW
Drive End Style:
External
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
1.031 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
4.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handle.ALMP
Handle Style:
Recessed flat
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum qq-a-266 alloy-14s cond.T handle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum qq-a-325 alloy-61 cond.T handle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum qq-a-601 comp.17 arm
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Primer spec.3-201
Drive Width:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the arm.AWJW
Arm Style:
Straight
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive facility.AWJY
Drive Facility Style:
Flatted, two sides parallel
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the crank.AWKA
Cranklength:
12.430 inches
MRC:
The means used to attach the handle to the item.AWKC
Handle Mounting Method:
Bolt
MRC:
An indication of whether or not a handle rotating feature is included.AWKD
Handle Rotating Feature:
Not included
MRC:
An indication of whether or not a ratchet is included.AWKF
Ratchet:
Not included
Crank Throw Length:
12.000 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Slot
MRC:
A measurement taken at right angles to the length of the mounting facility slot,in distinction from thickness.CPTW
Mounting Facility Slot Width:
0.375 inches
MRC:
A measurement of the longest dimension of the mounting facility slot,in distinction from width.CPTX
Err Default:
Err default
MRC:
A measurement of the longest dimension of the mounting facility slot,in distinction from width.CPTX
Mounting Facility Slot Length:
1.750 inches
