Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Silicone mixed with red iron oxide, chromate, mil-c-5541, cl 3 on gage ring
NSN
National Stock Number:
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.250 inches and 0.261 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.180 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.100 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
5.300 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
7.380 inches
Outside Corner Bevel Length Along Width:
0.200 inches
Outside Corner Bevel Length Along Length:
0.200 inches
Inside Corner Inverted Radius:
0.515 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
5.500 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
7.300 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.400 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.300 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.184 inches
Gage Ring Thickness:
Between 0.120 inches and 0.130 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
Outside Edge To Inside Edge Smallest Distance Along Width:
0.400 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
0.400 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 and rubber silicone class q
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification 1st material response and bac6-0421 fscm 81205 mfr ref 2nd material response and sws7220u fscm 21902 mfr ref 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
