Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Both ends partial bore, 0.312 in. Dia, 2.870 in. Lg first end, 1.410 in. Lg second end; both ends cir grooved, 0.150 in. W, 0.895 in. Dia, 1.280 in. Distance from first end to groove, 0.860 in. Distance from second end to groove; first end two cross drilled through holes, 0.187 in. Dia, 1.610 in. Distance from hole c to end, 1.120 in. Distance btwn hole c; second end cross drilled through hole, 0.187 in. Dia, 1.245 in. Distance from hole c to end
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Splined (involute)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Splined (involute)
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 9.200 inches and 9.280 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.9800 inches
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
1.280 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
Between 0.9050 inches and 0.9100 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
Between 0.9750 inches and 0.9930 inches
First End Pressure Angle:
30.0 degrees
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
0.9375 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.9880 inches and 0.9990 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
0.860 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
Between 0.9050 inches and 0.9100 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
Between 0.9750 inches and 0.9980 inches
Second End Pressure Angle:
30.0 degrees
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
0.9375 inches
First End Spline Quantity:
30
Second End Spline Quantity:
30
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
10.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 10b46 assn standard single material response
