Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Largest od end counterbored, 0.881 min 0.886 maximum dia, 0.375 in. Deep, w/two of thd mtg holes spaced 90 degrees apart, medium straight knurl
NSN
National Stock Number:
TXT
Description:
Shaft Collar
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.375 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
1.375 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the circumference.ABPH
Small End Diameter:
1.125 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.4780 inches and 0.4840 inches
Largest Diameter Length:
0.625 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
4
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
90.0
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Threaded all holes
MRC:
A measurement between specified points of a counterbore and the location.CQZD
Counterbore Depth And Location:
0.3750 inches 1st hole
MRC:
The length of a straight line which passes through the center of a counterbore,and terminates at the inside circumference,and the location.CRLR
Counterbore Diameter And Location:
0.8810 inches 1st hole and 0.8860 inches 1st hole
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.1380 inches all holes
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, astm 400-69
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, astm 400-69
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round stepped
