Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
301 stainless steel fins; standard mounting plate f300-072
NSN
National Stock Number:
TXT
Description:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Flange type mounting facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Finned, tubular, terminal's at each end
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
19.000 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Hermetically sealed stud
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
0.750 inches
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
2.000 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
1.375 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
1.250 inches
MRC:
A measurement taken at right angles to the length of the mounting facility,in distinction from thickness.ABKS
Mounting Facility Width:
1.563 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
2
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.063 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.125 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
12.000 inches
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
525.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
3
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches stud
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
28 per inch stud
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
254.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Single single voltage
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy resistance wire
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Magnesium oxide resistance wire embedding/support insulation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 sheath
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf stud
