Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Diameter of tailstock spindle 1 5/8 in.; tailstock spindle travel 4 3/8 in.; tailstock spindle center
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
30.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
Toolroom
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
1 taper attachment; 1 collant assembly; 1 splash guard, full length; 1 chip guard; 1 chuck guard; 1 chuck, 3 jaw, back plate mounting; 1 automatic carriage feed stop; 1 digital readout, 2 axis; 1 drain assembly for coolant; 1 south bend lathe name plate; 1 name plate; 1 lubrication chart
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
0.300
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Solid
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
12
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+40.0/+2500.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
13.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
13.000 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
8.250 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
54
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Direct pulley, back geared
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
3 morse
MRC:
Designates the size of the hollow spindle hole.BTYN
Hollow Spindle Hole Size:
1.500 inches
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
1.500 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand or power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand or power
MRC:
The number of carriage feed changes provided.BTYT
Carriage Feed Change Quantity:
39
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+56.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
