Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Resistance temp tracking within porm 20 ppm per degrees c of each other
NSN
National Stock Number:
TXT
Description:
Matched Resistor Set
MRC:
A measure of the opposition to the flow of electrical current.AAPP
Electrical Resistance:
9.76 kilohms and 9.76 kilohms and 40.2 kilohms
MRC:
The limits of permissible variation in the electrical resistance value of an item from its rated value,expressed in percent.AAPQ
Resistance Tolerance In Percent:
-0.5/+0.5 and -0.5/+0.5 and -0.25/+0.25
MRC:
The maximum amount of electrical energy that can be expended by a resistor,expressed in watts.ACZQ
Resistor Power Dissipation Rating In Watts:
0.125
MRC:
The number of resistors included with the item.AEZR
Resistor Quantity:
1 and 2
MRC:
Indicates the type of resistance element as determined by its construction.AKDZ
Resistor Element Type:
Metal film
MRC:
The name of the government agency or commercial organization that controls the component.AQHK
Component Controlling Agency:
Dod
MRC:
The specific number used to identify the component.AQHM
Component Identifying Number:
Rn60c9761d type no. And rn60c9761d type no. And rn60c4002c type no.
MRC:
The criteria determining the functional relationship of the components.ATYM
Component Relationship:
Matched to each other
MRC:
The limits of permissible variation between the electrical resistance values of the matched items,expressed in percent.ATYN
Respective Resistance Tolerance In Percent:
-0.25/+0.25
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
05257-905602 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
