Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
18-8 stainless steel female threaded hex standoff
NSN
National Stock Number:
TXT
Description:
Spacing Threaded Standoff
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b left internal (includes through thread)
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b right internal
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand left internal (includes through thread)
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand right internal
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.500 inches left internal (includes through thread)
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.500 inches right internal
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.000 inches
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Hexagon
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.370 inches and 0.380 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 left internal (includes through thread)
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 right internal
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
10.000 inches left internal (includes through thread)
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
10.000 inches right internal
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Screw size is 10in.-32 unf; thread internally of 0.500 in. On each end.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel standoff
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
18-8 stainless steel mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Left internal and right internal threads
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf left internal (includes through thread)
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf right internal
