Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
End has 0.094 in. Spherical radius point, 60.0 degrees angle 0.275 in. Lg
NSN
National Stock Number:
TXT
Description:
Externally Relieved Body Screw
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.580 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.325 inches and 2.335 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
0.540 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.180 inches
First Diameter From Head:
Between 0.326 inches and 0.336 inches
Second Diameter From Head:
0.4375 inches
Third Diameter From Head:
Between 0.326 inches and 0.336 inches
Fourth Diameter From Head:
Between 0.3685 inches and 0.3695 inches
Fifth Diameter From Head:
Between 0.258 inches and 0.262 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.120 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
0.700 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
0.880 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
1.470 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
1.564 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Slot
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.4375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
14
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
6
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
45.0 degrees
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
Between 2.325 inches and 2.335 inches
Sixth Diameter From Head:
Between 0.3685 inches and 0.3695 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5630 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
