Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.557 inches and 0.559 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 4.281 inches and 4.344 inches
Undercut Diameter:
Between 0.532 inches and 0.538 inches
Under Head Length:
Between 4.531 inches and 4.594 inches
Undercut Width:
0.031 inches
Second Undercut Width:
0.039 inches
Second Undercut Diameter:
Between 0.438 inches and 0.531 inches
First End Taper Length:
Between 0.031 inches and 0.094 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c and 38.0 rockwell c
First End Taper Angle:
Between 44.0 degrees and 46.0 degrees
Pin Head Diameter:
Between 0.656 inches and 0.719 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.031 inches and 0.094 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a322 assn standard single material response or astm a331 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 type 2 cl 1 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
