Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Automotive Axle Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
52.750 inches
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
2.750 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
2.250 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
2.380 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
2.250 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Splined
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of first end spline(s) provided.BBCD
First End Spline Quantity:
18
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
18
MRC:
The length of a straight line which passes through the center of the facility on the first end,and terminates at the circumference.BNPJ
First End Facility Diameter:
2.205 inches
MRC:
The facility furnished on the first end for engaging,locking,and/or positioning the item.BNTB
First End Engaging/locking/positioning Facility:
Locking device groove
MRC:
A measurement taken at right angles to the length of the facility on the first end,in distinction from thickness.BNTC
First End Facility Width:
Between 0.086 inches and 0.096 inches
MRC:
Indicates the location of the facility on the first end of the item.BNTD
First End Facility Location:
0.620 in. From shaft end
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Involute
MRC:
The pressure angle of the second end spline,expressed in degrees.BNTN
Second End Spline Pressure Angle In Deg:
30.0
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
Indicates the type of first end spline provided.BNYX
First End Spline Type:
Involute
MRC:
The pressure angle of the first end spline,expressed in degrees.BNYY
First End Spline Pressure Angle In Deg:
30.0
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, 10024, euclid div, general motors corp
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, 10024, euclid div, general motors corp
