Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Aircraft Fairing
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.800 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.200 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.050 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-15 acft
MRC:
An indication of the side for which the item is designed.BWJF
Side For Which Designed:
Left side
MRC:
Indicates the location at which the item is used in the aircraft.CZDJ
Aircraft Location:
Fairing bracket f-15 aileron retrofit design
MRC:
The series of letters and numbers which identify the basic aircraft mission and any additional modification or design changes.CZEK
Aircraft Mission Design Series:
F-15 eagle
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Matl 2024-0 bare al sheet or 2024-0 clad al sheet, ams-qq-a-250/4 or ams-qq-a-250/5; identify per mil-sts-130; penetrant inspect per ams 2647; heat treat 0 cond al aly to t-62 per ams 2770 after forming
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-qq-a-250/4 federal specification 1st material response or ams-qq-a-250/5 federal specification 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize and dichromate
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Sulfuric acid anodize and dichromate seal al components per mil-a-8625 type ii class i
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 type ii class i military standard single treatment response
