Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Material: molded part elastomer ls2332 clear and fresh, fabric dacron 15058
NSN
National Stock Number:
TXT
Description:
Special Actuator Valve Diaphragm
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.230 inches
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.060 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.100 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.015 inches
Outside Corner Radius:
0.310 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.624 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.624 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
0.545 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between 65.0 degrees fahrenheit and 250.0 degrees fahrenheit
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
Between 200.0 pounds per square inch and 400.0 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyethylene terephthalate
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air or gasoline
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Special shaped
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine fuel system components, nonaircraft
