Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Insulation tape, electrical
NSN
National Stock Number:
TXT
Description:
Electrical Insulation Tape
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
7200.0
MRC:
The appearance of the surface of an item as to its reflecting qualities.ABSW
Surface Luster:
Gloss
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
E-3 awacs acft
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Translucent
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.500 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
36.0 yards
MRC:
Indicates the type of adhesive used to affix the item to another surface.ALGP
Adhesive Type:
Pressure sensitive
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -65.0 degrees celsius and 180.0 degrees celsius
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
12 pounds per square inch
MRC:
Indicates the type and number of cuts provided.CQNS
Cut Type And Quantity:
1 single
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.CRZG
Nominalthickness:
3.5 mils
MRC:
Indicates the location of the adhesive on the item.CSJX
Adhesive Location:
One side
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Adhesive- pressure sensitive silicone polymer (thermosetting)
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Blue basic or brown basic or gray basic
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene basic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
A-a59474 type1 class 1 military specification single material response basic
