Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Winch0operated lift truck
NSN
National Stock Number:
TXT
Description:
Hand Lift Truck
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
34.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
24.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Global hawk
MRC:
A measurement of the longest dimension of a fork,in distinction from width.AGBS
Fork Length:
22.500 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
4.000 inches
Overall Height With Forks In Lowest Position:
67.500 inches
Overall Height With Forks In Highest Position:
120.500 inches
MRC:
The maximum vertical height or distance the carrying surface of the forks,platform,and the like,can be raised from ground level without extending the uprights beyond the specified collapse mast height.AGDB
Fork/platform Maximum Free Lift Height:
120.500 inches
MRC:
Indicates the type of lift mechanism included on the item.AGDC
Lift Mechanism Type:
Mechanical
MRC:
The maximum rated load the item is designed to accommodate.AYXK
Maximum Load Rating:
400.000 pounds
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
2 single solid all wheels
Lift Height Of Forks:
120.500 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Turn the winch handle, whihc is 4 ft 6 in from base, to lower the forks appoximately 1 in per handle rotation. Invert the forks and gain additional lifting height, lifting height inverted 10ft 1/2 in not inverted lifting height 8ft 3 in; base has two rear thermoplastic rubber wheels and two front dual wheeled casters with rubber-thread wheels, tuck is made from steel and aluminum; load center 12 in
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Stacker w/straddle outriggers