Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Section Block Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.864 inches and 1.884 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.384 inches and 0.404 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.205 inches and 0.211 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.197 inches
Center To Center Distance Between First And Second Mounting Holes:
Between 0.614 inches and 0.634 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
Between 0.384 inches and 0.404 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
3
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.258 inches first hole and 0.274 inches first hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.382 inches third hole and 0.398 inches third hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.382 inches second hole and 0.398 inches second hole
Distance From End To First Mounting Hole Center:
Between 0.521 inches and 0.541 inches
Distance From End To First Clamping Hole Center:
Between 0.240 inches and 0.260 inches
Center To Center Distance Between First And Second Clamping Holes:
Between 0.614 inches and 0.634 inches
Center To Center Distance Between First And Third Clamping Holes:
Between 1.301 inches and 1.321 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
