Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.065 in. Min 0.072 in. Maximum diameter hole drilled through second step on center line 0.130 in. Min 0.140 in. Maximum lg from chamfered end, solid film lubricant/molykote/ on shoulder
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
Under Head Length:
2.090 inches
First Step Diameter:
Between 0.3115 inches and 0.3119 inches
First Step Length:
Between 1.860 inches and 1.880 inches
Second Step Diameter:
Between 0.302 inches and 0.307 inches
Second Step Length:
Between 0.210 inches and 0.230 inches
First End Taper Length:
Between 0.010 inches and 0.020 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
39.0 rockwell c and 49.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches shoulder end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.080 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 420
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-26074 cl2 grb military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
