Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Metal Sheet
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Hot rolled
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
26.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
12.000 feet
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0149 inches
MRC:
The distance from the crest of one corrugation to the crest of an adjacent corrugation.ADZQ
Center To Center Distance Between Corrugations:
2.666 inches
MRC:
The vertical distance between the plane of the crest and the bottom of the valley.ADZR
Corrugation Depth:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Solid
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Sheared
MRC:
The direction in which the corrugated edges are turned in relation to each other when viewed in cross section.BRDZ
Corrugated Edge Direction:
Same direction
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
0.625 pounds per square foot
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
Not rated
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
Not rated
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
As fabricated
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, astm a366
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1009
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a366 assn standard 1st material response
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Any acceptable
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 type
