Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First inside corner chamfer 0.0625 in. By 45 degrees angle
NSN
National Stock Number:
TXT
Description:
Thrust Washer Bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.5000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.ABMX
Center Hole Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.5312 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.2500 inches
MRC:
The number of holes in the bearing surface excluding the center hole.AGKQ
Bearing Surface Hole Quantity:
1 first
MRC:
The length of a straight line which passes through the center of a bearing surface hole,and terminates at the circumference.AGKR
Bearing Surface Hole Diameter:
0.1250 inches first
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered first inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered second inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square first outside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square second outside corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 and steel comp 1025
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses
MRC:
The condition of the item with respect to the texture of the surface.SFCD
Surface Condition:
Ground
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
